Builds and Restorations
- Custom Guitar Builds - Call for an estimate
- Restorations - Call for an estimate (I will probably need to inspect guitar in person)
Fret work
- Refrets - $400.00 Includes leveling of the fretboard (If maple neck needs refinished) + $100.00
- Partial Refrets (requires fret dress) - $20 per fret + fret dress
- High fret leveling, per fret - $20.00 If more than a couple of frets are high, a complete leveling is needed
- Loose Fret Ends, per fret - $25.00
- Fret Dress - $120.00
Binding, Purfling or Rosette Repair
- Binding, Purfling or Rosette Repair or Replacement - $60 per hour Avg $350+ (These can be difficult and often require a lot of finish repair around the perimeter)
Structural Repairs
- Brace Repair- $35.00
- kerfing Repair or Replacement
- Neck or Tail Block repair or replacement
- Rib Brace Repair or Replacement
- Soundboard or Back Removal or Replacement (includes any needed kerfing replacement (Does not include brace repair or finish work)
- Re-glue, Gap filling of Broken, Cracked or Severed Parts (Does not include finish repair)
- Repair Top or Back Crack - $45.00+ (does not include any finish work)
- Repair Side Crack - $90.00+ (does not include any finish work)
Neck Work or Repairs
- Neck Resets - $350.00 and up
- Headstock Repair - $65.00+ (does not include any finish work)
- Fingerboard Repair or Replacement
- Custom Inlays
Bridge Repair
- Bridge Removal and Re-Install
- Re-route Saddle location for Correct Intonation - (If there is not enough room for correct break angle moving bridge will be required)
- Move Bridge Location to Correct Position for Intonation
- Correct Belly Bulge in Bridge area
- Bridge Plate Repair - $65.00
- Bridge Re-glue, Basic - $120.00
- Custom or Replicating Bridge - $200.00 (Includes making, slotting, and installing)
|
Finish work
- Complete Re-finish - $500.00+
- Partial Re-finish - shop rate of $60.00 per hour
- Spot Repair Chip, Dent, Ding or scratch Touch Ups
Humidity Related Issues
- Humidification Stabalization
Hardware installation, Replacement or Maintenance
- Drill, Plug and/or Re-drill Tuner, Bridge Pin, Bridge and Tail Piece Inserts or Output Jack Holes
- Pickup or pot Installations or Replacements - $60.00 per hour
- Install Shielding in Pick Up Cavity - $50.00
- Tuner Installations and Replacements
- Installation of Tone Caps or Treble Bleeds - $60.00 per hour
- Ouput Jack or Toggle Switch Re-wire or Replacement - $60.00 per hour
Setups:
Acoustic Guitars
- Setups Acoustic - $75.00 to $100.00
- New Bone Nut, 6 String - $90.00
- New Bone Nut, 12 String - $150.00
- New Bone Saddle, Basic - $40.00
- New Bone Saddle, Compensated - $55.00
- New Bone Saddle, Vintage Martin Style - $75.00
Electric Guitars
- Electric Guitar Setup, Hardtail Models - $65.00
- Electric Guitar Setup, Gibson Tune-O-Matic Style Bridge - $75.00
- Electric Guitar Setup, Strat style Floating Tremolo - $90.00
- Electric Guitar Setup, Floyd Rose style Floating Tremolo - $120.00
Bass Guitar
- Bass Guitar Setup, Basic - $65.00
General Maintenance
- General Maintenance - Clean, Polish and Oil Fretboard etc - $25.00
- Volume and Tone Pot or Switch Cleaning - $5.00 per pot
- Re-string - $25.00
All other work not priced or mentioned will be done at our shop rate of $60.00 per hour
|
|
Policy Note:
If your instrument has remained in our shop after repair for more than 90
days without payment, we will send you a notification your bill is past due.
If payment has not been received within 120 days, (Unless, you have some
extenuating circumstances) wich has been and must be communicated to us and agreed
upon wirthin that time frame. If by some circumstance we make agreement to
temporarily suspend the involuntary bailment of the instrument by mutual
agreement then storage fees will be applied to the total due. If you still do
not pay your bill or no such agreement has been reached we will instate/re-instate
the involuntary bailment and your instrument will become the property of
Garner Guitars and be sold or otherwise disposed of to cover your bill.
|